> ## Documentation Index
> Fetch the complete documentation index at: https://docs.solidyne.ar/llms.txt
> Use this file to discover all available pages before exploring further.

# Incoming streaming on UNIDEX

> Configuration of the Down-Stream RX module to receive audio from a LAN network or from an Internet streaming server.

## Incoming Streaming

The UNIDEX streaming module allows playback of an incoming audio stream. The source can be another device within the LAN network or a streaming server accessible via the Internet.

In the equipment's interface, this function appears identified as **DOWN-STREAM (RX)**. This appendix describes the network connection, the incoming stream configuration, the assignment of the `STREAM-1` input, and the basic channel settings.

## LAN Connection

Audio reception via streaming is performed through the Ethernet port labeled **Streaming Out**.

> [!WARNING]
>
> On the rear panel of the UNIDEX UX24 there are two Ethernet ports. **REMOTE CONTROL** is used to access the web control interface. **STREAMING** is used to send and receive audio streams. To configure incoming streaming, use the streaming Ethernet port.

**1. Connect the streaming port**

Connect the **Streaming Out** Ethernet port to the router using a standard UTP cable.

**2. Verify the streaming module IP address**

The router will assign an IP address to the streaming module via DHCP. This address appears on the main screen as `Stream IP`.

![Image](https://mintcdn.com/solidyne/LCUgBDgLCEZmieMA/images/image-1.png?fit=max\&auto=format\&n=LCUgBDgLCEZmieMA\&q=85\&s=7714b19243ade2f778619a76abb743e0)

**3. Choose the configuration method**

Settings can be made from the UNIDEX UX24 touchscreen. They can also be configured from a web browser by accessing the `Unidex IP` address. The original appendix recommends Google Chrome.

> [!NOTE]
>
> `Stream IP` identifies the IP address of the streaming module. `Unidex IP` identifies the IP address used to access the web control interface.

## Incoming Streaming Configuration

**1. Open SETTINGS**

From the main screen, tap **SETTINGS**.

**2. Open STREAMING**

On the **SETTINGS** screen, tap the **STREAMING** option.

**3. Select DOWN-STREAM RX**

Tap the **DOWN-STREAM (RX)** tab.

**4. Enable the module**

Change the **ENABLE/DISABLED** control to **ENABLED**.

**5. Select the protocol**

In the **PROTOCOL** field, select the protocol according to the type of streaming and the protocol used by the encoder equipment or by the streaming source.

**6. Enter the streaming source**

In **SERVER URL**, enter the URL or IP address of the streaming source. When the selected protocol is HTTP, the `PATH/MOUNT` field appears, required by Icecast servers.

For public streaming links under http or mms protocol; the link must be interpreted to load each piece of information into the corresponding field. For example, the streaming link [https://server1.stweb.tv/rcvos/live/playlist.m3u8](https://server1.stweb.tv/rcvos/live/playlist.m3u8) is entered as:\
\
PROTOCOL: http\
SERVER URL: [server1.stweb.tv](http://server1.stweb.tv)\
PATH MOUNT: /rcvos/live/playlist.m3u8

**7. Enter the port**

In **PORT**, enter the same port number defined in the encoder or in the streaming source.\
For public streamings (http; mms) enter port 0.

**8. Apply the configuration**

Tap **APPLY** to confirm the values.

## Audio Protocols and Formats

UNIDEX supports the following protocols for incoming streaming:

* **RTP** (PCM 44.1 kHz and MP3)
* **HTTP**, for Icecast and Shoutcast servers
* **MMS**

## Port Forwarding

Depending on the network architecture, it may be necessary to configure port forwarding, also known as **port forwarding**, for the incoming stream to reach the UNIDEX UX24.

This applies, for example, when an RTP stream originates from outside the LAN.

> [!NOTE]
>
> When the streaming source and the UNIDEX UX24 are located within the same LAN, it is not necessary to configure port forwarding.

## Assigning the STREAM-1 Input

When the **DOWN-STREAM (RX)** module is enabled, the incoming audio signal automatically replaces the `AES3 1` stereo input. The label for that input changes to `STREAM-1`.

To assign `STREAM-1` to a console channel, follow this procedure.

**1. Open SETTINGS Screen**

From the main screen, tap **SETTINGS**. The INPUTS option will be displayed.

**2. Open Input Configuration**

Locate the `STREAM-1 L` and `STREAM-1 R` inputs. If necessary, use the rotary encoder.

**3. Confirm Stereo Mode**

Tap the mode control and set the input to **STEREO**. This is the default mode for `STREAM-1`.

**4. Assign the Input to a Channel**

Tap the **ASSIGNED TO CHANNEL** dropdown menu and select the channel you want to assign the `STREAM-1` input to.

**5. Return to Main Screen**

Press **BACK** to return to the main screen.

## Channel Configuration

After assigning `STREAM-1` to a channel, configure the channel's basic parameters: mode, label, gain, and the behavior of the **CUE** button.

**1. Enter channel selection mode**

On the main screen, press **CHANNEL**. The **CUE** buttons temporarily switch to **SELECT** mode.

**2. Select the channel**

Press the **SELECT** button for the channel you wish to configure. The console returns to normal mode and displays the **CHANNEL** screen for the selected channel.

**3. Select a virtual channel**

To select virtual channels, turn the encoder until you locate the desired channel and press the encoder to confirm.

**4. Configure the channel mode**

Set **CHANNEL MODE** to **LINE**.

**5. Edit the label**

To edit **LABEL**, touch the channel name. A touch keyboard will appear to enter the new label.

**6. Adjust the gain**

Turn the encoder until the **GAIN** control is highlighted. Press the encoder and then turn it to modify the value.

**7. Define the operating level**

Adjust **GAIN** so that signal peaks reach approximately `-9 dBFS` on the level meter.

**8. Configure CUE behavior**

In the **ACTIONS** section, define the behavior of the **CUE** button for that channel. The original appendix shows the options `CUE SOLO` and `CUE AUTO-OFF`.

## Reference Diagram

The diagram shows a typical application with a main station and a remote site.

![Recurso 1entradas](https://mintcdn.com/solidyne/fUrkKK9X-cPhENK_/images/Recurso-1entradas.png?fit=max\&auto=format\&n=fUrkKK9X-cPhENK_\&q=85\&s=9460a5481066fe7ed86cab9f6a6d0df2)

At the main station, a streamer delivers PCM or MP3 audio to an external IP address and a defined port. The signal travels through the WAN network and arrives at the remote site's router.

At the remote site, the router must forward the external port to UNIDEX's `Stream IP` address and to the port configured in the **DOWN-STREAM (RX)** module.

> [!NOTE]
>
> In a connection within the same LAN, the streaming source can reach UNIDEX directly without port forwarding.

The diagram mentions alternative decoders that could receive the stream in other configurations, including:

* Solidyne DX816 On-Air Mixer
* Solidyne ADA102 Decoder
* Solidyne 542 APC FM Processor
* Equipment from other brands

## Interface Labels Glossary

| Label | Use in this documentation |
| - | - |
| `DOWN-STREAM (RX)` | UNIDEX UX24 incoming streaming module. |
| `Streaming Out` | Ethernet port used by the streaming module to send and receive audio. |
| `REMOTE CONTROL` | Ethernet port used to access the web control interface. |
| `STREAMING` | Ethernet port dedicated to audio streams. |
| `Stream IP` | IP address assigned by DHCP to the streaming module. |
| `Unidex IP` | IP address used to access the console's web interface. |
| `SERVER URL` | URL or IP address of the streaming source. |
| `PATH/MOUNT` | Path or mount point used by HTTP servers, especially Icecast. |
| `PORT` | Network port defined in the streaming source. |
| `STREAM-1` | Label assigned to the incoming audio input when `DOWN-STREAM (RX)` is enabled. |
| `AES3 1` | Stereo input automatically replaced by `STREAM-1`. |
| `CUE` | Channel CUE button; also used temporarily as `SELECT` when configuring channels. |


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.