Skip to main content

​
STUDIO MONITOR Output Connector

The STUDIO MONITOR output connector carries the monitoring signals to the main studio (Studio A in the UX24). Solidyne StudioBox HD3 and HD5 monitoring bays connect directly to this output using an RJ45–RJ45 STP cable, with a pin-to-pin connection. When a StudioBox is not used, the console includes an RJ45 to audio connectors adapter cable, which allows for direct connection of active speakers and headphone amplifiers in the studio.
The STUDIO MONITOR output must not be connected using cables other than the original one or via generic RJ45 adapter cables. This can cause failures or damage to the Studio Monitor output.
The signals present on the STUDIO MONITOR connector are: RJ45 front view - Pins according to TIA-568B
STUDIO B in UX24To configure a monitoring circuit in a second studio, one of the general outputs is assigned, configured to be muted when Studio B is active.