UNIDEX UX24

This section describes functionalities that only apply to the UX24 model. Also refer to the Unidex Series for more information.

Channels

The UNIDEX UX24 has 24 channels: 12 channels with 100 mm faders and 12 “virtual” channels that are operated from the touch screen or via remote web interface.
It can be expanded with UX6 modules to provide 18 or 24 physical faders.
Each channel can be assigned to any input (except the external tuner).
Channels are configured in three modes: MIC, LINE, or TELCO, which modifies their behavior and functions.
They can be assigned to four stereo mix buses: PGM, REC, AUX, and VBUS.

Microphone (4 mono balanced) With 48V phantom power, 4-band parametric equalizer, dynamic compressor, noise gate, and de-esser.
Line (4 stereo balanced) With 3-band parametric equalizer.
UNIDEX (16 mono / 8 stereo) Balanced inputs configurable as mono or stereo. Allow connection of UNIDEX adapters (microphones, telephone lines, Bluetooth interfaces, etc.). Include 3-band parametric equalizer, dynamic compressor, and noise gates.
USB (4 stereo digital inputs) Compatible with ASIO 3.0. The connected computer recognizes four playback devices. Include 3-band parametric equalizer.
AES-3 (4 stereo digital inputs) With 3-band parametric equalizer.
Incoming streaming Not an independent input; when activated, it replaces AES-3 input #1.
External tuner Dedicated input for transmission monitoring.

There are 18 stereo outputs and 4 monitoring outputs:

Program (PGM) Dual balanced stereo analog output.
4 balanced stereo (assignable)
4 unbalanced stereo (assignable) Can be configured as up to 8 mono outputs. Include mix-minus option for telephone and VoIP communications.
USB (4 assignable stereo sends) The computer connected via USB detects these outputs as recording devices.
AES-3 (4 digital outputs) Two of them can be assigned to any of the buses.
Dual PCM/MP3 streaming Simultaneous transmission via RTP and Icecast/Shoutcast.

Monitoring outputs for Studio (speakers and headphones).
Simplified monitoring connection for Studio with Solidyne StudioBox bays.
Monitoring outputs for Control (speakers and headphones).
Talkback to Studio.
Selectable command microphone: internal (PZM) or external.
4 assignable intercom lines to audio outputs.
Reverse talkback: allows speaking from Studio to the operator’s CUE (requires Studiobox HD3 or HD5).
CUE bus (Pre Fader Level) assignable to any output.

Features:

Allows triggering:

Activation is programmable (see corresponding section).