Skip to main content

​
Configuration

All Internet broadcasting options and modes can be accessed in two ways:
  1. From the onboard screen: using the rotary encoder (encoder).
  2. Remotely (recommended): using a computer and a web browser.

​
Web Access

1

Connect the console to the network

  • Ethernet (recommended) via the RJ45 port.
  • Or via the Wi-Fi antenna.
2

Connect the computer

The computer must be on the same network as the MX2200 and preferably using the same access method (Ethernet or Wi-Fi).
Some Wi-Fi networks do not allow access to devices connected by cable (LAN).
3

Open browser and enter IP

Enter the IP address of the MX2200 (corresponding to the method used: Ethernet or Wi-Fi) in the browser.
4

Get the IP from the console

Turn the CONTROL (encoder) knob and access the SETUP screen.
The first three items show the connection status and the assigned IP for Ethernet, Wi-Fi and Modem.
5

Get the IP from the computer

The IP can also be found by running the Solidyne Multi-Discovery tool on the PC.
Solidyne Multi-DiscoveryIf physical access to the console is not available, you can download the Multi-Discovery tool which detects Solidyne devices connected to the network.