- RECEIVE A CALL
- PLACE A CALL
1
Identify the incoming call
When receiving a call, the HOLD button flashes at the ring rate, regardless of the position of the PHONE/LINE IN button.
2
Verify channel in CUE
Ensure PGM/CUE is in the CUE position (released) before answering the line.
3
Select input
The PHONE/LINE IN button must be in the PHONE position (released) to listen to the phone line audio and for the line to receive the mix-minus return.
4
Answer the call
Press HOLD. The caller will hear the PGM signal as the mix-minus return.
5
Adjust headphone level
Adjust with the line’s LEVEL knob.
The overall CUE MONITOR level adjustment also affects this.
The overall CUE MONITOR level adjustment also affects this.
6
Speak privately
Press the corresponding microphone TALK button.
While held down, the caller stops hearing the program mix-minus and hears only the operator.
When released, the line returns to hearing the program signal.
While held down, the caller stops hearing the program mix-minus and hears only the operator.
When released, the line returns to hearing the program signal.
7
Monitor without program
In the CUE MONITOR section, the PGM button allows you to remove program audio from the headphones and listen only to the phone line.
8
Put on-air
Press PGM/CUE.
The level in the mix is adjusted with the LEVEL knob.
The caller will be able to converse with the four active microphones on the console.
The level in the mix is adjusted with the LEVEL knob.
The caller will be able to converse with the four active microphones on the console.
9
Hold the line
To take the call off-air and put it on hold:
- Turn the LEVEL knob to zero.
- Press CUE/PGM to return to CUE.
The line is held, listening to the program signal.
10
End the call
Press HOLD to hang up and release the line.